Engineering

The FabriTec Project Design & Engineering Department begins by establishing the required centerline geometry of the structure and modeling it in 3D using highly specialized software to define a final equilibrium shape that meets the requirements of the client. The equilibrium shape is then analyzed under various loading conditions to determine the steel, cable, and fabric requirements. The results of the computer modeling and analysis are transformed in the graphical design stages of the project into an accurate, extruded 3D model complete with actual steel and cable sizes and connections. The design drawings are then developed from the 3D model and submitted to the client for review and approval. Engineering calculations are also included in the submittal to the client. Upon approval of the design drawings and engineering calculations, the fabric shape is then patterned. “Patterning” is the art of representing three-dimensional shapes by connecting a series of flat, two-dimensional templates into one fabric assembly.

fabritec structures aia continuing education unit course learning unit

Architects, Learn About Fabric Structures & Earn An AIA CEU Credit

Take our Anatomy of a Tension Structure an AIA-approved Continuing Education course which will earn you 1.00 HW LU and a certificate of completion following successful completion of a 9-question quiz at its end. This presentation will inform you on the design, forms and uses, available materials, components and details, and the design/build process for tensile membrane/tension fabric structures.

Take CEU Course